top of page

CNC Machines

Car Factory
kratos logo.jpg

Flagship Model for High Production Machining

Tech Spec

  • Fixed gantry (bridge), moving table design with solid aluminum jig plate table

  • Open base design to allow dust to fall through to floor

  • Operator control mounted on overhead swing arm pendant

  • Table sizes range from 2x4’ to 6x12’, custom table sizes can be accomodated

  • Twin table and inline shuttle table designs available

  • High speed ballscrew assemblies, and linear rails

  • Spindle: manual collet, push-button quick change, or automatic (rack or carousel)

  • Optional programmable electronic drill (32mm centers)

  • Speeds up to 3,000 in/min (XY), 800 in/min (Z)

  • Customizable holddown: vacuum, rollers, flip pods or combination thereof

  • Numerous options for enhanced material squaring and workflow, up to fully-integrated load/unload

  • Fanuc electronics for optimal cycle time, datacom & operator convenience

  • Accu-Router provides post-processor for interfacing to most popular software (Mastercam, Plataine, SigmaNEST etc.)

5-Axis: High Precision 3D CNC Routing

Tech Spec

  • Depending on requirements, structural design may be Series III with elevated gantry for 5-axis spindle motion, or overhead drive on steel columns

  • Ideal for tight tolerance plastic & composite machining (aerospace, automotive)

  • World-class spindles with tool change capability

  • Best-of-breed fixturing for holding complex parts repeatably

  • Latest Fanuc electronics for simultaneous axis control, fine-tuned to your application

Series III-C (3-Axis): Model for High Production Machining, Now Ideal Platform for Green CNC Modernization

Tech Spec

  • Available with either newly fabricated structural components or re-acquired (steel base, bridge, enclosures and aluminum table)

  • No longer in new production - only re-acquired & modernized via Green CNC

  • Green CNC: customer can provide used Accu-Router or competitive brand for upgrade, or we can source on their behalf

  • Table sizes range from 4x8’ to 5x12’, and/or twin or inline shuttle (up to 6’ x 25’)

  • High speed ballscrew assemblies, including a 50 mm OD spin-the-nut model on the X axis, & THK linear rails;

  • Spindle: manual collet, push-button quick change, or automatic (rack or carousel)

  • Optional programmable electronic drill (32mm centers)

  • Speeds up to 3,000 in/min (XY), 800 in/min (Z)

  • Customizable holddown: vacuum, rollers, flip pods or combination thereof

  • Numerous options for enhanced material squaring and workflow, up to fully-integrated load/unload

  • Latest Fanuc electronics for optimal cycle time, datacom & operator convenience

  • Accu-Router provides post-processor for interfacing to most popular software (Mastercam, Plataine, SigmaNEST etc.)

Series II (3-Axis): Forerunner to Series III, Now Ideal Platform for Green CNC Modernization

Tech Spec

series-II-main.jpg

  • Predecessor to current model Series III (1986-89)

  • No longer in new production - only re-acquired & modernized via Green CNC

  • Green CNC: customer can provide used Accu-Router or competitive brand for upgrade, or we can source on their behalf

  • Once limited by speed (round rails vs THK, non-"spin the nut" screws) & narrow gantry (sufficient travel for only one routing spindle & auxiliary air drill)

  • Single table sizes range from 4x8’ to 5x12’

  • Spindle: manual collet, push-button quick change, or automatic (rack or carousel)

  • Optional programmable electronic drill (32mm centers)

  • Speeds up to 3,000 in/min (XY), 800 in/min (Z)

  • Customizable holddown: vacuum, rollers, flip pods or combination thereof

  • Numerous options for enhanced material squaring and workflow, up to fully-integrated load/unload

  • Series II Classic with pre-owned electronics ideal for smaller production & budgets

  • Series II High Velocity: gantry extended 12" to accommodate programmable 5-drillhead plus spindle, hi-speed THK rails & screws

bottom of page